Nozzle Tips might need to be replaced if:
- damaged or bent due to malfunction or mishandling,
- cleaning the nozzle does not appear sufficient to improve print quality.
See full instructions for the routine to clean the nozzle here: Cleaning the Nozzle.
Rapidia is constantly striving to improve the printing experience for our customers by developing parameters that allow customization of slicer settings, print speed, and nozzle sizes. Reach out to support@rapidia.com to learn about the latest developments in offering 0.25mm and 0.60mm nozzles for the Conflux 1 Metal 3D Printing Platform.
| Required Tools for this Routine |
|---|
| Nozzle Cleaning Tool |
| Water Pick |
ΒΆ How To
 |
 |
| 1. Place the nozzle tip tool over the installed nozzle, and turn it counterclockwise to unthread the nozzle tip. | 2. Use the nozzle tip tool to thread the new nozzle tip into the nozzle. If the new nozzle is of a different diameter, be sure to update the settings in your slicing software. |